MicroNet SP5001C Manual de usuario descargar pdf (Pagina 34)

6. Network Interface Screen

Click Network Interface in the navigation panel and open the Network Interface

Screen.

Use this screen to setup Network Interface identification information for SP5001/S.

Figure 17. Network Interface

The following table describes this screen.

Table 3. H323 Configuration

LABEL DESCRIPTION

IP Address Enter the IP Address of SP5001/S in dotted decimal notation for e.g.

192.168.4.92. Range of IP Address setting (0.0.0.0~255.255.55.255).

Subnet Mask

Enter the IP Subnet Mask of your SP5001/S in dotted decimal notation for

e.g. 255.255.0.0.

Default Routing

Gateway

Enter the IP Address of the default-

outgoing gateway of your SP5001/S in

dotted decimal notation for e.g. 192.168.1.254.

DHCP Select enable/disable Dynamic Host Configuration.

DNS primary Enter the DNS IP Address in dotted decimal notation for e.g. 168.95.1.1

DNS Secondary Enter the DNS secondary IP Address in dotted decimal notation for e.g.

168.95.1.1

SNTP Select enable/disable Simple Network Time Protocol.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 85 86

Sin comentarios

MicroNet SP5001C Manual de usuario Pagina 34