MicroNet SP5004 Manual de usuario descargar pdf (Pagina 70)

6.12. [sysconf]

This command displays system information and configurations.

usr/config$ sysconf

System information and configuration

Usage:

sysconf [-print] [-idtime digit] [-bf digit] [-keypad dtmf]

[-faxtype type][-2833type type][-lcdrop ON/OFF]

[-droptime digit][-eod digit] [-callerid type]

[-service used][-dtmfstart digits] [-dtmfend digits]

sysconf -print

-print Display system overall information and configuration.

-idtime Inter-Digits time.(1~10 sec)

-service Specify gateway service type. (0: Dial in service,

1: HotLine service.)

-bf BusyForward.(ON:1 / OFF:0)

-keypad Select DTMF type: 0=In-band,

1=RFC2833.

-faxtype FAX Payload Type (range:96~128 inter-used:100,102~105)

-2833type RFC2833 Payload Type (range:96~128 inter-used:100,102~105)

-lcdrop Disconnect Supervision(Loop Current Drop) (ON:1 / OFF:0)

-droptime Period of Loop Current Drop (ms)

-eod End of Dial Digit setting(0: none, 1: *, 2: #)

-callerid Caller ID Type setting, 0: Disable,

1: FSK(BELLCORE),

2: DTMF.

-dtmfstart DTMF CallerID Start Symbol.

-dtmfend DTMF CallerID End Symbol.

-ivr IVR Auto Hang up (0:Disable /1:Tone /2:reverse )

Example:

sysconf -keypad 0 -eod 2 -callerid 1

Parameter Usage:

-print

Show the sysconf current status.

-idtime

Set the duration (in second) of two pressed digits in dial mode as

timed out. If after the duration user hasn’t pressed next number, it

will dial out all number pressed (1-10 seconds).

-service

Specify gateway service type. (0: Dial in service, 1: HotLine

service.)

-bf

Busy Forward function

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 85 86

Sin comentarios

MicroNet SP5004 Manual de usuario Pagina 70