MicroNet SP5004 Manual de usuario descargar pdf (Pagina 81)

6.19. [bureau]

To set Hotline function must be under Peer-to-Peer mode and switch to hotline mode.

usr/config$ bureau

Bureau line setting information and configuration

Usage:

bureau [-hotline [Port DestIP TELnum]]

bureau -print

-print Display Bureau line information and configuration.

-hotline Set Hot line information. (Port range: 1~6)

Note:

Hotline feature should be used together with:

$sysconf -service 1 (HotLine service)

$sip -mode 0 (peer-to-peer mode)

Example:

bureau -hotline 1 192.168.4.69 628 2 192.168.4.200 999

Parameter Usage:

-print

Shows the current settings

-hotline

Define Line Hotline table respectively. The table is included [Line

number], [destination IP Address] and [destination Port or

Number].

For example

1. Destination is a FXS device (Branch), 71 is its Line1 number

usr/config$ bureau -hotline 1 203.69.28.242 71

From HQ, user picks up the telephone handset connects to gateway, and then hears

the ringback tone generated from destination (Branch). Of course, the destination line

71 is ringing simultaneously.

2. Destination is a FXO device, Port_1 has connected to PSTN Line.

usr/config$ bureau -hotline 1 200.168.4.69 82265699

User picks up the Line1, and then hears the ringback tone generated from destination.

Simultaneously, 82265699 numbers is the destination, which is dialed from Port_1

(Above FXO example is subject to the FXO configurations, such as 2nd dial ON or

OFF.)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86

Sin comentarios

MicroNet SP5004 Manual de usuario Pagina 81