MicroNet SP5058 Manual de usuario descargar pdf (Pagina 18)

-16-

5.5 Admin

Click on the Admin link on the navigation bar in order to configure the user name and

password to log into the device. You may also reboot this device and reset the setting back to

the factory defaults. Described below along with an image are details on how to configure

the administrative settings.

 IP Address Mode: select Static or DHCP. If you select Static, you are required to

enter a default IP address, subnet mask, and gateway. However, if you select DHCP

the IP address, subnet mask, and gateway will be assigned to this Access Point via a

DHCP server.

 Default IP address: enter the IP address of this Access Point.

 Default subnet mask: enter the subnet mask for this Access Point.

 Default Gateway: enter the IP address of the default gateway.

 User name: this user name is used in order to log into the Access Point. If you would

like to change the existing user name, enter it into this field.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Sin comentarios

MicroNet SP5058 Manual de usuario Pagina 18