MicroNet SP1910 Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
54
4.3.11 Security
-IP Filter
IP filter function can block LAN PCs from communicating with Internet PCs by preventing
specific IP addresses from accessing external network through router via specific a port
number or range.
1) Click Advanced Setup” Security” IP Filtering” to display the page
above and then click the “ Add” button to enter the page below to add filtering rules.
Filter Name: Enter the defined filtering name.
IP Version: Only IPv4 is provided.
Protocol: TCP/UDP; TCP; UDP; ICMP available for your option.
Source IP address [/prefix length]: Enter the LAN IP address to be filtered.
Source Port (port or port: port): The port number or range used by LAN PCs in accessing
the Internet.
Destinations IP address [/prefix length]: The external network IP address to be accessed
by LAN PC.
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 87 88

Comentarios a estos manuales

Sin comentarios