MicroNet SP918GL Manual de usuario descargar pdf (Pagina 29)

2. The computer cannot access the Internet in the Infrastructure mode.

Make sure the computer is associated and joined with the correct Access Point. To

check this connection: Right-click on the Local Area Connection icon in the taskbar>

select View Available Wireless Networks. The Connect to Wireless Network screen

will appear. Please make sure you have selected the correct available network, as

shown in the illustrations below.

•

Check that the IP Address assigned to the wireless adapter is within the same IP

Address range as the access point and gateway. (Since the 54Mbps Access Point

has an IP Address of 10.0.0.1, wireless adapters must have an IP Address in the

same range, e.g., 10.0.0.x. Each device must have a unique IP Address; no two

devices may have the same IP Address. The subnet mask must be the same for all

the computers on the network.) To check the IP Address assigned to the wireless

adapter, double-click on the Local Area Connection icon in the taskbar > select

the Support tab and the IP Address will be displayed.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

Sin comentarios

MicroNet SP918GL Manual de usuario Pagina 29