MicroNet SP918GL Manual de usuario descargar pdf (Pagina 32)

4. What variables may cause my wireless products to lose reception?

Wireless products let you access your network from virtually anywhere you want.

However, the positioning of the products within your environment will affect the wireless

range. Please refer to Installation Considerations in the Wireless Basics section of

this manual for further information about the most advantageous placement of your

wireless products.

5. Why does my wireless connection keep dropping?

• Antenna Orientation- Try different antenna orientations for the 54Mbps Access

Point. Try to keep the antenna at least 6 inches away from the wall or other objects.

• If you are using 2.4GHz cordless phones, X-10 equipment or other home security

systems, ceiling fans, and lights, your wireless connection will degrade dramatically

or drop altogether. Try changing the Channel on your Access Point and Wireless

adapter to a different Channel to avoid interference.

• Keep your product away (at least 3-6 feet) from electrical devices that generate RF

noise, like microwaves, Monitors, electric motors, etc.

6. Everything seems to be properly set up, so why can’t I get a wireless

connection?

Have you enabled wireless encryption? Your Access Point supports wireless encryption

- but remember that to establish a wireless connection while enabling Encryption on the

54Mbps Access Point, you must also enable encryption on all other members of the

network.

• The Encryption settings are: 64, 128, or 152 bit. Make sure that the encryption bit

level is the same on the Access Point and other network members.

Make sure that the SSID on the Access Point and the computer are exactly the same. If

they are not, wireless connection will not be established. Please note that there are

SSIDs for 802.11g. The default SSID for 802.11g is WLAN.

1 2 ... 27 28 29 30 31 32 33 34 35

Sin comentarios

MicroNet SP918GL Manual de usuario Pagina 32