MicroNet Fibre to SAS/SATA II RAID Subsystem Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
FIBRE-to-SAS/SATA RAID SUBSYSTEM
26
User Manual
The firmware upgrade process for each type of SES board is different.
For PRO-90-5601 SES board:
1. Connect RS232 serial cable to the RS232 port of SES module.
2. Open terminal connection and configure terminal settings as follows:
Baud Rate: 115200
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
3. In terminal console, type “proses reset” then immediately press “Q”.
4. Select “Transfer” then “Send File”. Use “Ymodem” protocol. Select the SES
firmware binary file. Click “Send” to start upgrade process.
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 159 160

Comentarios a estos manuales

Sin comentarios